home *** CD-ROM | disk | FTP | other *** search
/ PC-SIG: World of Education / PC-SiG's World of Education.iso / wor / disk2714.zip / README < prev    next >
Text File  |  1980-01-01  |  5KB  |  115 lines

  1. The files listed below should be on the GEdit Distribution Disk:
  2.  
  3.     GO.BAT - batch file to execute GEdit and load the README file
  4.     README - this file
  5.     HINSTALL.EXE - executable file for installing GEdit on a hard disk
  6.     FINSTALL.EXE - executable file for creating a work disk
  7.     FEATURES - discussion on the major features of GEdit
  8.     CR.SCR - copyright screen
  9.     ORDER.FRM - form for registering GEdit
  10.     BUG.RPT - form for reporting bugs and suggestions
  11.     GE.EXE - GEdit executable file
  12.     GE.HLP - general information on GEdit
  13.     MOUSE.HLP - help file on using a mouse with GEdit
  14.     MENU.HLP - help file on the GEdit Menu
  15.     SETUP.HLP - help file on setup
  16.     EDITMENU.HLP - help file on the Main Edit Menu
  17.     EDIT.HLP - help file on edit commands
  18.     PRINT.HLP - help file on printing
  19.     EPSONFX.DRV - printer driver for the Epson FX-100 printer
  20.     HP-III.DRV - printer driver for the Hewlett-Packard LaserJet III printer
  21.     KEYMAP.EXE - executable file for assigning keystrokes to commands
  22.     PCODES.EXE - executable file for creating and editing printer drivers
  23.     FC.EXE - executable file for spliting and recombining large files
  24.     MANUAL.DOC - GEdit manual
  25.     PMANUAL.EXE - executable file for printing manual
  26.  
  27.  
  28. Install on Floppy disk System:
  29.  
  30.     Step 1: Format a new disk to use as a work disk.
  31.  
  32.     Step 2:  Place the Distribution Disk in Drive A: and the blank disk in
  33.     Drive B:,  and at the A>  prompt enter "FINSTALL".  FINSTALL will copy
  34.     the files listed below from the Distribution Disk onto the blank disk:
  35.  
  36.         GE.EXE           BUG.RPT          CR.SCR           ORDER.FRM
  37.         GE.HLP           MOUSE.HLP        MENU.HLP         SETUP.HLP
  38.         EDITMENU.HLP     EDIT.HLP         PRINT.HLP        EPSONFX.DRV
  39.         HP-III.DRV       KEYMAP.EXE       PCODES.EXE       FC.EXE
  40.  
  41.     Step 3: Label the disk in drive B: as "GEdit Work Disk".
  42.  
  43.     Step 4:  Print the manual  -  place the Distribution Disk in drive A:,
  44.     make sure the printer is ready, and at the A> prompt enter "PMANUAL".
  45.  
  46.     Step 5: Store the Distribution Disk in a safe place.
  47.  
  48.     Step 6:  Execute GEdit by placing the work disk in drive A: and at the
  49.     A> prompt entering the command "GE".
  50.  
  51.  
  52. Install on Hard Disk System:
  53.  
  54.     Step 1:  Place the  Distribution Disk  in the A: Drive,  and at the A>
  55.     prompt enter "HINSTALL".
  56.  
  57.     Step 2:  Directions will be displayed on the screen. You will be asked
  58.     to specify the directory on the hard disk where you want to locate the
  59.     program file. If the directory does not exist it will be created.  The
  60.     files listed below will be copied from the Distribution Disk into this
  61.     directory.
  62.  
  63.                   GE.EXE                        BUG.RPT
  64.                   ORDER.FRM                     KEYMAP.EXE
  65.                   PCODES.EXE                    FC.EXE
  66.  
  67.     Step 3:  You will be asked  to specify the directory  on the hard disk
  68.     where you want to locate the support files.  If the directory does not
  69.     exist it will be created.  The files listed below  will be copied from
  70.     the Distribution Disk into this directory:
  71.  
  72.                   GE.HLP                        MOUSE.HLP
  73.                   MENU.HLP                      SETUP.HLP
  74.                   EDITMENU.HLP                  EDIT.HLP
  75.                   PRINT.HLP                     EPSONFX.DRV
  76.                   HP-III.DRV                    CR.SCR
  77.  
  78.     Step 4:  Modify the  autoexec.bat file  on the boot disk  to include a
  79.     line to set  the environment variable  "support"  equal to the path in
  80.     which the support files are located  (i.e. SET SUPPORT=C:\GE\SUPPORT).
  81.     This will insure that GEdit can always find its support files.
  82.  
  83.     Step 5: Modify the autoexec.bat file to include a line to set the path
  84.     to the directory in which GE.EXE is located (i.e "PATH=C:\DOS;C:\GE").
  85.     This will insure that DOS can find GE.EXE if the default directory  is
  86.     not the directory in which GE.EXE is located.
  87.  
  88.     Step 6:  Print the manual  -  place the Distribution Disk in drive A:,
  89.     make sure the printer is ready, and at the A> prompt enter "PMANUAL".
  90.  
  91.     Step 7: Store the Distribution Disk in a safe place.
  92.  
  93.     Step 8:  Execute GEdit by entering the command "GE" at the DOS prompt.
  94.  
  95.  
  96. GEdit must be registered  if you find it useful  and intend to continue to
  97. use it beyond the 30-day trial period.  Upon registration you will be sent
  98. the  latest version of GEdit and you will be sent all updates for a period
  99. of one year from the date of registration.
  100.  
  101. To register GEdit you can submit the on-disk registration form in the file
  102. "ORDER.FRM"  directly  to Cat Creek Enterprises, Inc., or you can register
  103. using your MC, Visa, AmEx,  or Discovery card by calling Public (software)
  104. Library at 800-242-4PsL  (from overseas:  713-524-6394)  or by FAX to 713-
  105. 524-6398  or by Compuserve  to 71355,470. Specify item number 10569.
  106.  
  107. The numbers listed above are for ordering only. Cat Creek Enterprises,Inc.
  108. can NOT be reached at those numbers. To contact Cat Creek Enterprises,Inc.
  109. for  information about dealer pricing,  volume discounts,  site licensing,
  110. the status of shipment  of the product,  the latest version number  or for
  111. technical information,  or to discuss returns,  write  to Cat Creek Enter-
  112. prises,Inc. at P. O. Box 606, Bristol, TN 37621.
  113.  
  114.  
  115. If you are reading this in GEdit - press F3 to quit.